Product Overview
Xclio xCold M.2 SSD Heatsink with Thermal Pads for PC and PS5
Your M.2 SSD may get hot and throttle back on the data rate. This M.2 SSD heatsink effectively reduces SSD temperature by up to 40% by dissipating heat to help maintain system stability.With a double-sided clip design, 6 adjustable height screws, and 2 spare screws are suitable for M.2 NVME SSD of various heights, stable installation, and better protection of your M.2 SSD with great heat dissipation performance.
This Xclio xCold M.2 SSD kit consists of a black high-grade aluminum heatsink with thermal pads and a screwdriver.
Made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and with good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the M.2 SSD.
Features
Reduces M.2 SSD heat between 15 to 40 degrees and enhances performance and longevity of your SSD & also improves the aesthetics of your PC system and is the No.1 choice for PS5 Console.
Compatible with Single/Double-sided M.2 NVME NGFF SSD 22x80.
Supports standard M.2 Next Generation Form Factor (NGFF) 2280 single-sided type SSDs, SATA, and NVMe.
Three Nano Silicon Thermal conductive adhesive Pads.
Aluminum body, Anodic Oxidation Surface Treated.
Contents
Heatsink.Mini Screwdriver.
Flat Screws for a heatsink.
10x Thermal Blue Square pads 0.8mm Thickness (for resting on top of the SSD Chips).
1x Blue Thermal Pad 1mm Thickness (for resting on the top full length of the SSD).
1x Red Thermal Pad 0.5mm Thickness (for resting on the Bottom of the SSD).
Installation Instructions on how to install onto your M.2 SSD
*Please note*
When installing the thermal gum please remove the protective plastic cover.
1: Using the 10 squares stick + 1 Thinner Long strip
a) Place the red or pale blue strip (Please note this is the thinnest Strip) on the bottom/underside of the M.2 SSD.
b) Place Little square pads of 3 or 5 units depending on the number of chips (from the 10 units in the pack) covering the chips and leaving spaces on the PCB where there is no chip.
c) Place the SSD with the screw notch matching the screw notch into/onto the tray while the XCILO is facedown.
d) Place the heat sink smooth face down resting on top of the SSD little blue pads again matching the screw hole notch creating a type of sandwich then hold firmly while you screw the screws in to lock it all together - job done ready for PS5 installation.
2: Use just the two long strips (Fat one on top, Thin one on the bottom
a) Place the Red (or pale blue strip) Please note this is the thinnest Strip on the bottom/underside of the M.2 SSD.
b) Place the Blue (fatter Strip) on the top Side of the M.2 SSD covering the length of the SSD.
c) Place the SSD with the screw notch matching the screw notch into/onto the tray while the XCILO is facedown.
d) Place the heat sink smooth face down resting on top of the SSD with the blue strip matching the screw hole notch creating a type of sandwich then hold firmly while you screw the screws in to lock it all together - job done ready for PS5 installation.
Shipping & Returns – RMA
TECHMIMO promises to always deliver high quality products at competitive prices. Our mission is to gain 100% customer satisfaction. However, in rare cases if you aren't satisfied with any of our products received then you can apply for an RMA (Return Material Authorization) which is subject to our terms and conditions below. At the time of placing an order the purchaser is required and assumed to agree to these terms and conditions.
Definitions
“We” or “Us” or “Our” means TECHMIMO and any authorized person acting on behalf of TECHMIMO.
“You” or “Customer “can be one of the following:
A "Business Customer" which means a customer or consumer acting on behalf of an actively trading business entity.
A "Consumer" which means an individual generally the end-consumer who is not acting on behalf of a business entity.
Non-Faulty Items Returns Policy
- We only accept RMA requests from you who originally purchased them and cannot accept return requests from a third party on your behalf.
- You must inform us in writing within 14days after receiving the item(s) if you wish to return all or part of the original order that are considered non-faulty. Any RMA requests for non-faulty item(s) received after this period will not be considered.
- We only accept returned items that are in-saleable condition.
- Saleable condition is defined as meeting the same standards as newly manufactured/sourced products and still have manufacturer’s seal fully intact and are unopened and in the original packaging with all the instructions, warnings etc. TECHMIMO reserves the right to determine salability of a product.
- You must inform us of any faulty items in writing within 14 days from the date of item(s) received by you. In case of incomplete or damaged products, we must be informed within seven (7) days of you receiving the item. In some cases, we may consider items returned after 14 days if it can be proven that the item(s) was/were faulty when delivered and did not develop fault due to customer misuse, not following manufacturer’s instructions or damaged by the customer.
- In case of wrong power supply or voltage being used by the customer no return is acceptable.
- In case of incomplete/damaged goods received by the customer, the sales team will try to replace the order, however, this is subject to further stock being available. We will try our best to rectify the problem within thirty (30) days. If the problem cannot be rectified within this time-frame, then customer will post the item(s) back to the address indicated on the RMA to claim any refunds. Proof of return postage must always be kept to certify return and ensure the correct claim for shipping cost can be made.
- No re-stocking or shipping fees will be paid by the customer in case of a successful faulty/Incomplete/Damaged item return.
- We will normally issue a full refund to the customer within 14 days from the date the item is received at our warehouse.
Fees – Non-Faulty Items:
- TECHMIMO will impose a £30 on product value of £150, and on above £150 value product, 25% restocking will be applied, unless the return is proven to be due to an error on our part such as we shipped the wrong part etc.
- If the initial payment for the order was made using a credit card then a 3% fee may also apply.
- For international orders, all import charges and/or custom fees will be charged to you where these apply. These will be communicated to you (if applicable) after we receive the RMA request.
- All return postage (a proof of postage must be obtained and is required by us to process any refunds) will be paid by the customer.
Faulty Items Returns Policy
- We only accept RMA requests from you who originally purchased them and cannot accept returns from a third party on your behalf.
- You must inform us of any faulty items in writing within 14 days from the date of item(s) received by you. In some cases, we may consider items returned after 14 days if it can be proven that the item(s) was/were faulty when delivered and did not develop fault due to customer misuse, not following manufacturer’s instructions or damaged by the customer.
- Upon receiving RMA for faulty item(s), our technical team will investigate and offer help via phone and/or remote access to rectify any problems. However, if the fault remains and cannot be rectified then the customer would need to post the item(s) back to us (proof of postage must be obtained and is required by us to process any refunds).
- In case of wrong power supply or voltage is used then no return is acceptable.
- No fees will be paid by the customer in case of a successful faulty item return.
- We will normally issue a full refund to the customer within 14 days from the date the item is received at our warehouse.
Procedure for Returning Products
Products that are returned to TECHMIMO require a Return Material Authorization (RMA) which can be requested from our Customer Service department or by emailing a written request to sales@techmimo.co.uk
The following information will be required to issue the RMA:
- TECHMIMO invoice number & Customer P.O. number or Delivery reference number
- Date of purchase
- Part number / description / quantity (if items were purchased in pack quantities then only full pack quantities will be accepted for return)
- Reason for the return.
Shipping returns to TECHMIMO with an RMA
- Products authorized to be returned on the RMA will be need to be posted to the return address as indicated on the RMA.
- TECHMIMO should receive returned product(s) within 14 days after issuing the RMA. Items received after this period will void the original RMA.
- If we are organizing the transportation of the products to be returned, instructions will be provided by Customer Service to organize collection of the products to be returned by a carrier selected by us.
Inspection of returns at TECHMIMO
Unless faulty, only the returned item(s) received in salable condition, will be considered for return and credit. At arrival of the return products, we will determine whether returned products are in a sell able condition.
Products received in a non-salable condition will be handled in one of the following ways:
- Refurbishment of the products returned – TECHMIMO will determine refurbishment costs and inform Customer Service
- Destruction with Customer approval, including any applicable scrapping charges.
- Return of the product to the customer, including any applicable transportation charges
Xclio xCold M.2 Pro SSD 22x80 Aluminum Heat Sink Cooling Kit with Thermal Pads PC/PS5
Product is New
Free Shipping
Free standard shipping on orders over $99
Estimated to be delivered on 12/01/2022 - 15/10/2022.