CORSAIR VENGEANCE DDR4 16GB (2X8GB) 3600MHZ MEMORY (BLACK)
CORSAIR DDR4 VENGEANCE LPX RAM
This dual packet of top-end memory brings 16GB of premium Vengeance LPX memory to your PC. If you prefer to fill two DIMM slots or are looking to save on some expense then this set of 2x8GB memory could be for you. It has sufficient density to deal with common computer uses such as gaming and word processing. The embedded speeds are toward the bottom-end of DDR4 but boast some of the fastest CAS latency in DDR4 technology, this means the RAM doesn’t have to wait as long between reading commands. Combining the CAS Latency with the Vengeance LPX heat-sink makes for a very reliable and fluent process.
Available in: RED DDR4 Vengeance LPX memory.
3600MHz
Speed
18-22-22-42
CAS Latency
1.35V
Voltage
16GB 2x8GB
Capacity
PERFORMANCE & COMPATIBILITY
Optimized & Tested for the Latest Motherboards
The DDR4 form factor is optimized for the latest AMD and Intel DDR4 motherboards and offers higher frequencies, greater bandwidth, and lower power consumption than DDR3 modules. Vengeance LPX DDR4 modules are compatibility-tested across AMD and Intel DDR4 motherboards for reliably fast performance.
MEMORY PERFORMANCE ADVANCEMENTS
Voltage
(Lower is better)
Density
(Higher is better)
Speed
(Higher is better)
DDR
DDR2
DDR3
DDR4
Experience the True Power of DDR4 RAM
It was 2007 that the DDR3 standard was announced and in the years since then technology has only been pushed further. Eventually the memory standard was pushed to the edge of DDR3 limits, until DDR4 smashed through those limits! Corsair DDR4 doubled the bandwidth and dramatically increase clock speeds, whilst consuming less power than ever before.
INSTALLING DDR4 MEMORY
Motherboard Socket DDR4 Optimization
Pin Out: 288
Vengeance LPX DDR4 form factor is optimized and compatibility-tested for the latest X99 and Intel 100 series motherboards, forging reliably fast performance. With any standard DDR4 DIMM memory socketed motherboard you shouldn’t have any trouble installing the powerful Vengeance LPX RAM and getting that DDR4 performance into your system.
LOW PROFILE MEMORY DESIGN
Corsair DDR4 Memory Size
The clever and stylish, low-profile design of DDR4 LPX memory means it can fit comfortably into much smaller spaces. The LPX series of Vengeance DRAM was prepared for when the first of the Micro ATX and Mini-ITX motherboards for DDR4 memory released. In any system that has minimal internal space the small form factor of the LPX DDR4 RAM from Corsair is ideal.
OVERCLOCKING DDR4 RAM
Unlock the Potential within DDR4
Corsair’s Vengeance LPX DDR4 has been built around high-performance overclocking. Each module from the LPX series utilizes highly-screened memory ICs and an eight-layer PCB, with further overclocking improvments through the efficient heat spreader that provides effective cooling. The eight-layer PCB system on these DDR4 memory sticks helps if your computer is trying to squeeze too much information into one layer, causing a significant rise in temperature which can create a multitude of issues.
VENGEANCE LPX HEAT SPREADER
Cooler Memory for Better Performance
The heat spreader on Corsair LPX DDR4 memory is made of pure aluminum, creating a faster heat dissipation and a cooler operation. Usually the overclocking overhead is limited by the operating temperature, but not for the Vengeance LPX. Due to the unique design of the heat spreader, the temperature is constantly lowered as heat is pulled away from the ICs and into your system’s cooling path. Not only does the heat spreader allow Vengeance LPX to perform better, but the aggressive yet refined form factor looks great in any system.
| Core Specifications | |
|---|---|
| Size / Capacity | 16GB (2x8GB) |
| Memory Model | Vengeance LPX Black |
| Max. Memory Channels Provided by Kit | Dual (2) |
| Memory Type | DDR4 |
| Memory Type (ECC) | Non-ECC |
| Memory Type (R/U) | UDIMM (Unbuffered) |
| Memory Speed | PC4-28800 (3600) |
| Pins | 288 |
| Memory Ranks | |
| CAS Latency | 18-22-22-42 |
| Voltage | 1.35 V |
| Design, Features & Lighting | |
|---|---|
| Cooler | Anodised Aluminium Heatspreader |
| Features |
|
Shipping & Returns – RMA
TECHMIMO promises to always deliver high quality products at competitive prices. Our mission is to gain 100% customer satisfaction. However, in rare cases if you aren't satisfied with any of our products received then you can apply for an RMA (Return Material Authorization) which is subject to our terms and conditions below. At the time of placing an order the purchaser is required and assumed to agree to these terms and conditions.
Definitions
“We” or “Us” or “Our” means TECHMIMO and any authorized person acting on behalf of TECHMIMO.
“You” or “Customer “can be one of the following:
A "Business Customer" which means a customer or consumer acting on behalf of an actively trading business entity.
A "Consumer" which means an individual generally the end-consumer who is not acting on behalf of a business entity.
Non-Faulty Items Returns Policy
- We only accept RMA requests from you who originally purchased them and cannot accept return requests from a third party on your behalf.
- You must inform us in writing within 14days after receiving the item(s) if you wish to return all or part of the original order that are considered non-faulty. Any RMA requests for non-faulty item(s) received after this period will not be considered.
- We only accept returned items that are in-saleable condition.
- Saleable condition is defined as meeting the same standards as newly manufactured/sourced products and still have manufacturer’s seal fully intact and are unopened and in the original packaging with all the instructions, warnings etc. TECHMIMO reserves the right to determine salability of a product.
- You must inform us of any faulty items in writing within 14 days from the date of item(s) received by you. In case of incomplete or damaged products, we must be informed within seven (7) days of you receiving the item. In some cases, we may consider items returned after 14 days if it can be proven that the item(s) was/were faulty when delivered and did not develop fault due to customer misuse, not following manufacturer’s instructions or damaged by the customer.
- In case of wrong power supply or voltage being used by the customer no return is acceptable.
- In case of incomplete/damaged goods received by the customer, the sales team will try to replace the order, however, this is subject to further stock being available. We will try our best to rectify the problem within thirty (30) days. If the problem cannot be rectified within this time-frame, then customer will post the item(s) back to the address indicated on the RMA to claim any refunds. Proof of return postage must always be kept to certify return and ensure the correct claim for shipping cost can be made.
- No re-stocking or shipping fees will be paid by the customer in case of a successful faulty/Incomplete/Damaged item return.
- We will normally issue a full refund to the customer within 14 days from the date the item is received at our warehouse.
Fees – Non-Faulty Items:
- TECHMIMO will impose a £30 on product value of £150, and on above £150 value product, 25% restocking will be applied, unless the return is proven to be due to an error on our part such as we shipped the wrong part etc.
- If the initial payment for the order was made using a credit card then a 3% fee may also apply.
- For international orders, all import charges and/or custom fees will be charged to you where these apply. These will be communicated to you (if applicable) after we receive the RMA request.
- All return postage (a proof of postage must be obtained and is required by us to process any refunds) will be paid by the customer.
Faulty Items Returns Policy
- We only accept RMA requests from you who originally purchased them and cannot accept returns from a third party on your behalf.
- You must inform us of any faulty items in writing within 14 days from the date of item(s) received by you. In some cases, we may consider items returned after 14 days if it can be proven that the item(s) was/were faulty when delivered and did not develop fault due to customer misuse, not following manufacturer’s instructions or damaged by the customer.
- Upon receiving RMA for faulty item(s), our technical team will investigate and offer help via phone and/or remote access to rectify any problems. However, if the fault remains and cannot be rectified then the customer would need to post the item(s) back to us (proof of postage must be obtained and is required by us to process any refunds).
- In case of wrong power supply or voltage is used then no return is acceptable.
- No fees will be paid by the customer in case of a successful faulty item return.
- We will normally issue a full refund to the customer within 14 days from the date the item is received at our warehouse.
Procedure for Returning Products
Products that are returned to TECHMIMO require a Return Material Authorization (RMA) which can be requested from our Customer Service department or by emailing a written request to sales@techmimo.co.uk
The following information will be required to issue the RMA:
- TECHMIMO invoice number & Customer P.O. number or Delivery reference number
- Date of purchase
- Part number / description / quantity (if items were purchased in pack quantities then only full pack quantities will be accepted for return)
- Reason for the return.
Shipping returns to TECHMIMO with an RMA
- Products authorized to be returned on the RMA will be need to be posted to the return address as indicated on the RMA.
- TECHMIMO should receive returned product(s) within 14 days after issuing the RMA. Items received after this period will void the original RMA.
- If we are organizing the transportation of the products to be returned, instructions will be provided by Customer Service to organize collection of the products to be returned by a carrier selected by us.
Inspection of returns at TECHMIMO
Unless faulty, only the returned item(s) received in salable condition, will be considered for return and credit. At arrival of the return products, we will determine whether returned products are in a sell able condition.
Products received in a non-salable condition will be handled in one of the following ways:
- Refurbishment of the products returned – TECHMIMO will determine refurbishment costs and inform Customer Service
- Destruction with Customer approval, including any applicable scrapping charges.
- Return of the product to the customer, including any applicable transportation charges
Corsair Vengeance LPX Black 16GB 3600 MHz AMD Ryzen Tuned DDR4 Memory Kit
Product is New
Free Shipping
Free standard shipping on orders over $99
Estimated to be delivered on 12/01/2022 - 15/10/2022.